> News > Industry News

Industry News

How to Get an Accurate Screw Barrel Quote

To get an accurate screw barrel quote, send a drawing if you have one. If you don't, send product photos plus the major dimensions — diameter, length and flange information — together with the material you process and the surface treatment you want. With those details clear, EJS can usually make ......

What Steel Is Used for Screw Barrels? 38CrMoAlA, 42CrMo & 31CrMoV9 Explained

Screw barrels are made from alloy steels chosen for strength, hardenability, and how well they take a hardened surface. The most common are 38CrMoAlA (1.8509) and 34CrAlNi7 (1.8550) for nitrided parts, 42CrMo (4140) and 31CrMoV9 (1.8519) for through-hardened work, 40Cr for bimetallic barrels, and SS......

Segment Twin Screw Barrel: The Modular Component Driving Modern Plastic Processing Efficiency

In plastic extrusion and compounding industries, the performance of the extruder directly affects production efficiency, material quality, and operating costs. While many people focus on the screw design or extrusion machine itself, the Segment Twin Screw Barrel is one of the key components that det......

Extruder Screw Barrel: The Complete Guide to Types, Materials & How to Choose | EJS

An extruder screw barrel is the core plasticizing unit of an extrusion machine: a rotating screw turning inside a heated cylindrical barrel that conveys, melts, mixes, and pressurizes plastic or rubber so it can be pushed through a die. The right barrel for your line is decided by three things — ......

How Long Does an Extruder Screw Barrel Last?

There is no single figure, and any supplier who gives you one without asking what you process is guessing. Screw barrel service life is set mainly by your compound, then by throughput, process discipline and construction depth. The practical answer is not a number from a brochure — it is a wear rate......

What Materials Are Used for Extruder Screw Barrels?

Every extruder screw barrel is two material decisions, not one. A base steel carries the mechanical load — usually 38CrMoAlA, 42CrMo or a stainless grade. A surface treatment survives the polymer — either a nitrided case 0.4 to 0.7 mm deep, or a bimetallic alloy layer several times thicker. Get the ......

<1 2 3 4 5...14 >